Endress+Hauser iTEMP TMT142B - Maintenance and cleaning; Repair; Spare parts

Maintenance and cleaning iTEMP TMT142B
42 Endress+Hauser
Date Firmware version Changes Documentation
05/2020 03.01.zz Original firmware BA00191R/09/en/13.20
10 Maintenance and cleaning
No special maintenance work is required for the device.
A clean, dry cloth can be used to clean the device.
11 Repair
11.1 General information
Due to its design, the device cannot be repaired.
11.2 Spare parts
Spare parts currently available for the device can be found online at:
http://www.products.endress.com/spareparts_consumables. Always quote the serial
number of the device when ordering spare parts!
1 2 3 4 5 6 7 8 9
A0007959
 16 Field transmitter spare parts
Item No. 7 Housing
Certificate:
A Non-hazardous area + Ex ia / IS
B ATEX Ex d / XP
Material:
C Aluminum, HART7
D Stainless steel 316L, HART7
Cable entry:
1 3 x NPT ½" female thread + terminal block + 1 dummy plug