TMT162
18 Endress+Hauser
Functional safety according to
IEC 61508/ IEC 61511
FMEDA including SFF determination and PFD
AVG
-calculation according to IEC 61508. See also Functional
Safety Manual in Section ’Documentation’ (for HART
®
device).
Certification FOUNDATION
Fieldbus™
The temperature transmitter is certified and registered by the Fieldbus Foundation. The device meets all the
requirements of the following specifications:
• Certified according to FOUNDATION Fieldbus™ specification
• FOUNDATION Fieldbus™ H1
• Interoperability Test Kit (ITK), revision status 4.61 (device certification no. available on request): the device
can also be operated with certified devices of other manufacturers
• Physical Layer Conformance Test of Fieldbus FOUNDATION™ (FF-830 FS 1.0)
Certification PROFIBUS
®
PA The temperature transmitter is certified and registered by the PNO (PROFIBUS
®
Nutzerorganisation e. V.),
PROFIBUS user organization. The device meets all the requirements of the following specifications:
• Certified in accordance with PROFIBUS
®
PA Profile 3.01 + Profile 3.01 Amendment 2, Amendment 3
• The device can also be operated with certified devices of other manufacturers (interoperability)
To Next Page
Loading...
