Endress+Hauser iTEMP TMT162 - Switch-On Delay; Power Supply; Electrical Connection

TMT162
Endress+Hauser 9
Switch-on delay
Power supply
Electrical connection
T09-TMT162ZZ-04-00-XX-en-000
Short description of blocks
Physical Block The Physical Block contains all the data to uniquely identify and
characterize the device. It corresponds to an electronic nameplate for the
device. In addition to parameters required for operation of the device at the
Fieldbus, the Physical Block provides information such as order code,
device ID, hardware revision, software revision etc. The display settings are
also made using the Physical Block.
Transducer Block "Sensor 1" and "Sensor 2" The field transmitter Transducer Blocks contain all the measuring and
device-specific parameters relating to the measurement of the input
variables.
Analog Input (AI) In the AI function block, the process variables from the Transducer Blocks
are processed for the subsequent automation functions in the control
system (e.g. scaling, limit value processing).
PROFIBUS
®
PA
HART
®
4 s, during switch-on operation I
a
≤ 3.8 mA
FOUNDATION Fieldbus™
5 s
PROFIBUS
®
PA
8 s
3
3
3
3
3
3
1
1
1
1
1
1
1
4
4
2
2
2
2
2
RTD
W
RTD
W
RTD
W
5
5
5
6
6
6
6
RTD
RTD
6
W
W
4
4
4
4
TC
TC
+
-
1
2
3
4
5
6
4-wire
2-wire 3-wire
Bus connection and
supply voltage
Sensor 1
Sensor 2
Sensor 1
Sensor 2