Operation options iTEMP TMT162
20 Endress+Hauser
6.1.1 Measured value display and operating elements
Display elements
°C
°F
%
K
10
0
20
30
40
50
60
70
80
90
100
!
1
2
3
4
5
6
7
A0034101
11 LC display of the field transmitter (illuminated, can be plugged in in 90° steps)
Item no. Function Description
1 Bar graph display In increments of 10% with indicators for underranging and
overranging.
2 'Caution' symbol This is displayed when an error or warning occurs.
3 Unit display K, °F, °C or % Unit display for the internal measured value displayed.
4 Measured value display, digit
height 20.5 mm
Displays the current measured value. In the event of an error or
warning, the corresponding diagnostics information is displayed.
Please refer to the relevant Operating Instructions for the device
for more information.
5 Status and information display Indicates which value is currently shown on the display. Text can
be entered for every value. In the event of an error or a warning,
the sensor input that triggered the error/warning is also displayed
where applicable, e.g. SENS1
6 'Configuration locked' symbol The 'configuration locked' symbol appears when configuration is
locked via the hardware or software
7 'Communication' symbol The communication symbol appears when HART® communication
is active.
Local operation
NOTICE
‣
ESD - Electrostatic discharge. Protect the terminals from electrostatic discharge. Failure
to observe this may result in the destruction or malfunction of parts of the electronics.
To Next Page
Loading...
