iTEMP TMT162 Operating menu and parameter description
Endress+Hauser 105
User entry Date in the format year-month-day (YYYY-MM-DD)
Factory setting 2010-01-01
Process unit tag
Navigation Expert → Communication → HART info → Process unit tag
Description Use this function to enter the process unit in which the device is installed.
User entry Up to 32 alphanumeric characters (letters, numbers and special characters)
Factory setting 32 x '?'
Location description
Navigation Expert → Communication → HART info → Location description
Description Use this function to enter a description of the location so that the device can be located in
the plant.
User entry Up to 32 alphanumeric characters (letters, numbers and special characters)
Factory setting 32 x '?'
Longitude
Navigation Expert → Communication → HART info → Longitude
Description Use this function to enter the longitude coordinates that describe the device location.
User entry –180.000 to +180.000 °
Factory setting 0
Latitude
Navigation Expert → Communication → HART info → Latitude
Description Use this function to enter the latitude coordinates that describe the device location.
User entry –90.000 to +90.000 °
To Next Page
Loading...
