Endress+Hauser iTEMP TMT162 - Altitude; Location Method; Pv

Operating menu and parameter description iTEMP TMT162
106 Endress+Hauser
Factory setting 0
Altitude
Navigation Expert → Communication → HART info → Altitude
Description Use this function to enter the altitude data that describe the device location.
User entry –1.0 · 10
+20
to +1.0 · 10
+20
m
Factory setting 0 m
Location method
Navigation Expert → Communication → HART info → Location method
Description Use this function to select the data format for specifying the geographic location. The
codes for specifying the location are based on the US National Marine Electronics
Association (NMEA) Standard NMEA 0183.
Options • No fix
• GPS or Standard Positioning Service (SPS) fix
• Differential PGS fix
•
Precise positioning service (PPS)
• Real Time Kinetic (RTK) fixed solution
• Real Time Kinetic (RTK) float solution
• Estimated dead reckoning
• Manual input mode
• Simulation mode
Factory setting Manual input mode
"HART output" submenu
Assign current output (PV) →  69
Navigation Setup → Assign current output (PV)
Expert → Communication → HART output
→ Assign current output (PV)
PV
Navigation Expert → Communication → HART output→ PV