Endress+Hauser iTEMP TMT162 - Shielding and Grounding

Wiring iTEMP TMT162
18 Endress+Hauser
Commubox
1
2
3
4
5
6
+
-
1
2
3
4
5
6
+
-
3
4
+
-
3
PMC731: PIC0001
Online
1 >Group Select
2 PV 0.7 bar
HELP
SEND
HOME
A0033548
 7 HART® connection with Endress+Hauser power supply unit, including integrated communication resistor
1
Temperature field transmitter
2 HART® handheld communicator
3 PLC/DCS
4 Configuration software, e.g. FieldCare
5 Configuration via Field Xpert SFX350/370
6 Power supply unit, e.g. RN221 from Endress+Hauser
1
2
3
4
5
6
³ 250 W
Commubox
PMC731: PIC0001
Online
1 >Group Select
2 PV 0.7 bar
HELP
SEND
HOME
A0033549
 8 HART® connection with other power supply units that do not have a built-in HART® communication
resistor
1
Temperature field transmitter
2 HART® communication resistor
3 PLC/DCS
4 Configuration software, e.g. FieldCare
5 HART® handheld communicator
6 Configuration via Field Xpert SFX350/370
5.3.3 Shielding and grounding
The specifications of the HART FieldComm Group must be observed during installation.