iTEMP TMT162 Operating menu and parameter description
Endress+Hauser 89
Description Use this function to display the minimum temperature measured in the past at sensor
input 1 or 2 (peakhold indicator).
Sensor n max value
n = Stands for the number of sensor inputs (1 and 2)
Navigation Diagnostics → Measured values → Min/max values → Sensor n max value
Expert → Diagnostics → Measured values → Min/max values → Sensor n max. value
Description Use this function to display the maximum temperature measured in the past at sensor
input 1 or 2 (peakhold indicator).
Device temperature min.
Navigation Diagnostics → Measured values → Min/max values → Device temperature min.
Expert → Diagnostics → Measured values → Min/max values → Device temperature
min.
Description Use this function to display the minimum electronics temperature measured in the past
(peakhold indicator).
Device temperature max.
Navigation Diagnostics → Measured values → Min/max values → Device temperature max.
Expert → Diagnostics → Measured values → Min/max values → Device temperature
max.
Description Use this function to display the maximum electronics temperature measured in the past
(peakhold indicator).
14.2.5 "Simulation" submenu
Current output simulation
Navigation Diagnostics → Simulation → Current output simulation
Expert → Diagnostics → Simulation → Current output simulation
Description Use this function to switch simulation of the current output on and off. The display
alternates between the measured value and a diagnostics message of the "function check"
category (C) while simulation is in progress.
To Next Page
Loading...
