Operation options iTEMP TMT71, TMT72
28 Endress+Hauser
3. Configure the DIP switch on the rear of the display accordingly. In general: switch to ON
= function enabled, switch to OFF = function disabled.
4. Fit the display onto the head transmitter in the correct position. The head transmitter
accepts the settings within one second.
5. Secure the cover back onto the terminal head or field housing.
Switching write protection on/off
Write protection is switched on and off via a DIP switch on the rear of the optional attachable
display. When write protection is active, parameters cannot be modified. A lock symbol on the
display indicates that write protection is on. Write protection prevents any write access to the
parameters. Write protection remains active even when the display is removed. To deactivate
write protection, the display must be attached to the transmitter with the DIP switch switched
off (WRITE LOCK = OFF). The transmitter adopts the setting during operation and does not
need to be restarted.
Turning the display
The display can be rotated 180° using the "DISPL. 180°" DIP switch.
6.2 Transmitter configuration
The transmitter and measured value display are configured via the HART
®
protocol or CDI (=
Endress+Hauser Common Data Interface). The following operating tools are available for this
purpose:
Operating tools
FieldCare, DeviceCare, Field Xpert
SMT70
(Endress+Hauser)
SIMATIC PDM
(Siemens)
AMS Device Manager
(Emerson Process Management)
Field Communicator TREX, 475
(Emerson Process Management)
The configuration of device-specific parameters is described in detail in the Operating
Instructions for the device.
6.3 Access to the operating menu via the SmartBlue app
The device can be operated and configured via the SmartBlue app. The connection is
established via the Bluetooth® interface.
The SmartBlue app is available for free download for Android devices (Google Playstore) and
iOS devices (iTunes Apple Shop) : Endress+Hauser SmartBlue
Directly to the app with the QR code:
To Next Page
Loading...
