Endress+Hauser iTEMP TMT71 - 7 Commissioning; Post-Installation Check

iTEMP TMT71, TMT72 Commissioning
Endress+Hauser 29
A0037924
System requirements
• Devices with iOS:
• iPhone 4S or higher, from iOS9.0
• iPad2 or higher, from iOS9.0
• iPod Touch 5th generation or higher, from iOS9.0
• Devices with Android:
Android 4.4 KitKat or higher
Download the SmartBlue app:
1. Install and start the SmartBlue app.
 A Live List shows all the devices available.
2. Select the device from the Live List.
 The Login dialog box opens.
Logging in:
3. Enter the user name: admin
4. Enter the initial password: serial number of the device.
5. Confirm your entry.
 The device information opens.
The transmitter's optional Bluetooth interface is only active if a display unit is not
attached or the CDI interface is not used for device configuration.
7 Commissioning
7.1 Post-installation check
Before commissioning the measuring point make sure that all final checks have been carried
out:
• "Post-installation check" checklist→  17
• "Post-connection check" checklist →  24