Endress+Hauser iTEMP TMT71 - Page 34

DRAFT
DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT
DRAFT DRAFT DRAFT
Commissioning iTEMP TMT71/72
The parameters are also protected against modification if the user logs out of the
Maintenance user role and the system switches to the Operator role. No keyhole symbol
is displayed, however.
To disable the write protection, the user must log on with the Maintenance user role via
the relevant operating tool.
User role concept →  21
34 V. 1, Rev. 2, 4-10-2018 Endress+Hauser