DRAFT
DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT
DRAFT DRAFT DRAFT
Operating menu and parameter description iTEMP TMT71/72
14.3.4 Information submenu
Device submenu
Squawk
Navigation System → Information → Device → Squawk
Description This function can be used locally to facilitate the identification of the device in the field.
Once the Squawk function has been activated, all the segments flash on the display.
Selection • Squawk once: Display of device flashes for 60 seconds and then returns to normal
• Squawk on: Display of device flashes continuously.
• Squawk off: Squawk is switched off and the display returns to normal operation.
User entry Activate the relevant button
Serial number
Navigation System → Information → Device → Serial number
Description Displays the serial number of the device. It can also be found on the nameplate.
Uses of the serial number
• To identify the measuring device quickly, e.g. when contacting Endress+Hauser.
• To obtain specific information on the measuring device using the Device Viewer:
www.endress.com/deviceviewer
User interface Max. 11-digit character string comprising letters and numbers.
Order code
Navigation System → Information → Device → Order code
Description Displays the order code of the device. It can also be found on the nameplate. The order
code is generated from the extended order code, which defines all the device features of
the product structure. In contrast, the device features cannot be read directly from the
• To order an identical spare device.
• To identify the device quickly and easily, e.g. when contacting Endress+Hauser.
Firmware version
88 V. 1, Rev. 2, 4-10-2018 Endress+Hauser
To Next Page
Loading...
