Endress+Hauser iTEMP TMT82 - Operating Options; Overview of Operation Options

Operating options iTEMP TMT82
22 Endress+Hauser
6 Operating options
6.1 Overview of operation options
1
2
4
5
7
6
3
ON
OFF
1
2
4
8
16
32
64
HW
SW
ADDR
SIM
WRITE LOCK
DISPL. 180°
8
A0014460
 13 Operating options of the temperature transmitter
1 PLC (programmable logic control)
2 Transmitter power supply unit, e.g. RN221N (with communication resistor)
3
Connection for HART
®
modem Commubox FXA191, FXA195
4 Field Communicator 375, 475
5 Computer with operating tool (e.g. FieldCare, AMS Device Manager, SIMATIC PDM)
6
HART
®
modem Commubox FXA191 (RS232) or FXA195 (USB)
7 Commubox FXA291 (USB) or TXU10 (USB) for connecting to the CDI interface
8 Temperature transmitter as head transmitter or DIN rail device, onsite operation via DIP switches on rear of
optional display possible only for head transmitter
For the head transmitter, display and operating elements are available locally only if
the head transmitter was ordered with a display unit!