iTEMP TMT82 Diagnostics and troubleshooting
Endress+Hauser 43
transmitter: TMT82. When ordering spare parts, please quote the serial number of the
device!
Type Order number
Standard - DIN securing set (2 screws and springs, 4 shaft lock-down rings, 1 plug for the
display interface)
71044061
US - M4 securing set (2 screws and 1 plug for the display interface) 71044062
TID10 service cable; connecting cable for service interface, 40 cm 71086650
Commubox FXA195 HART
®
, for intrinsically safe HART communication with FieldCare via the
USB interface.
FXA195-.......
Spare parts kit for DIN rail transmitter (terminals and fixing lever housing) XPT0003-A1
11.4 Return
The measuring device must be returned if it is need of repair or a factory calibration, or if
the wrong measuring device has been delivered or ordered. Legal specifications require
Endress+Hauser, as an ISO-certified company, to follow certain procedures when handling
products that are in contact with the medium.
To ensure safe, swift and professional device returns, please refer to the procedure and
conditions for returning devices provided on the Endress+Hauser website at
http://www.endress.com/support/return-material
11.5 Disposal
The device contains electronic components and must therefore be disposed of as electronic
waste. Please pay particular attention to the national disposal regulations in your country.
11.6 Software history and overview of compatibility
Revision history
The firmware version (FW) on the nameplate and in the Operating Instructions indicates
the device release: XX.YY.ZZ (example 01.02.01).
XX Change to main version. No longer compatible. The device and
Operating Instructions change.
YY Change to functions and operation. Compatible. The Operating
Instructions change.
ZZ Fixes and internal changes. No changes to the Operating Instructions.
Date Firmware Version Modifications Documentation
01/11 01.00.zz Original firmware BA01028T/09/en/13.10
10/12 01.00.zz No changes to functions and operation. BA01028T/09/en/14.12
02/14 01.01.zz Functional safety (SIL3) BA01028T/09/en/15.13
02/17 01.01.zz Changes in configuration parameter for Functional
safety (SIL3)
BA01028T/09/en/17.17
To Next Page
Loading...
