Troubleshooting TMT84
44 Endress+Hauser
9.5 Spare parts
When ordering spare parts, please specify the serial number of the device!
9.6 Return
For later reuse or to return the device to the service organization of your supplier, the device must
be packed in such a way as to protect it from impact and damage. The original packaging material
offers the best protection here.
When sending the unit in to be checked, please enclose a note with a description of the error and
the application.
9.7 Disposal
The device contains electronic components and must, therefore, be disposed of as electronic waste
in the event of disposal. Please pay particular attention to the local regulations governing waste
disposal in your country.
9.8 Firmware/software history and overview of
compatibility
Release
The release number on the nameplate and in the Operating Instructions indicates the device release:
xx.yy.zz (example 01.02.01).
Type Order number
Adapter for top-hat rail mounting, DIN rail clip according to IEC 60715 51000856
Standard - DIN securing set (2 screws and springs, 4 shaft lock-down rings,
1 plug for the display interface)
71044061
US - M4 securing set (2 screws and 1 plug for the display interface) 71044062
xx Change to main version.
No longer compatible. The device and Operating Instructions change.
yy Change to functions and operation.
Compatible. Operating Instructions change.
zz Fixes and internal changes.
Operating Instructions do not change.
Date Firmware version Modifications Documentation
07/2008 1.00.zz Original firmware/software BA257R/09/en/07.08
71076269
06/2011 1.01.zz PROFIBUS Profile 3.02 update BA00257R/09/en/01.11
71137264
To Next Page
Loading...
