Endress+Hauser Levelflex FMP51 Modbus - Page 54

Levelflex FMP51 Modbus
54 Endress+Hauser
FMP51: Dimensions of process connection (G1½,NPT1½,flange) and probe
I
J
L
N
M
K
150 (5.91)
ø12 (0.47)
ø16 (0.63)
39
(1.54)
500 (19.7)
1000 (39.4)
2.2 (0.09)
min. 50 (1.97)
max. 551 (21.7)
max. 1051 (41.4)
SW14
AF14
SW10
AF10
SW14
AF14
SW14
AF14
SW10
AF10
SW10
AF10
ø22 (0.87)
ø4 (0.16)
ø4 (0.16)
20 (0.79)
ø42.4
(1.67)
ø12 (0.47)
ø12.7 (0.5)
ø42.2 (1.66)
M14
2 (0.08)
2.77 (0.11)
4 (0.16)
S
9 (0.35)
P P
12 (0.47)
ø29.5 (1.16)
ø75 (2.95)
LN
R
40 (1.57)
QQ
T
78 (3.1) 78 (3.1) 78 (3.1)
G1½
NPT1½
25
(0.98)
26
(1.02)
SW55
AF55
SW55
AF55
B
D
C
A0012756
 19 FMP51: Process connection / probe; dimensions: mm (in). Unit of measurement mm (in)
B Thread ISO228 G1-1/2 (Feature 100)
C Thread ANSI MNPT1-1/2 (Feature 100)
D Flange ANSI B16.5, EN1092-1, JIS B2220 (Feature 100)
I Rope probe 4mm or 1/6" (Feature 060)
J Rope probe 4mm or 1/6"; centering disk optional (Features 060 and 610)
K Rod probe 12mm or 1/2"; centering disk optional, see table below (Features 060 and 610)
L Rod probe 16 mm or 0.63in, 20" or 40" divisible; centering disk optional, see table below (Feature 060 and
610)
M Coax probe; AlloyC (Feature 060); with venting hole Ø approx. 8 mm (0.3 in)
N Coax probe; 316L (Feature 060); with venting holes Ø approx. 10 mm (0.4 in)
LN Length of probe
P Thickness of the centering star; table of values: see below
Q Diameter of the centering star; table of values: see below
R Reference point of the measurement
S Thickness of the center washer or centering star; table of values: see below
T Diameter of the center washer or centering star; table of values: see below