Endress+Hauser Levelflex FMP51 Modbus - Test, Certificate; Product Documentation on Paper

Levelflex FMP51 Modbus
72 Endress+Hauser
Test, Certificate
Feature 580
"Test,
Certificate"
Designation Available for
JA 3.1 Material certificate, wetted metallic parts, EN10204-3.1 inspection
certificate
FMP51
JB Conformity to NACE MR0175, wetted metallic parts FMP51
JE Conformity to NACE MR0103, wetted metallic parts FMP51
JF Conformity to AD2000, wetted metallic parts:
Material of all wetted/pressurized parts conform to AD2000 (Technical
rules W2, W9, W10)
FMP51
JN Ambient temperature transmitter –50 °C (–58 °F)

Devices with this option undergo a routine check test (startup test at
–50 °C (–58 °F)).
FMP51
KD Helium leak test, internal procedure, inspection certificate FMP51
KE Pressure test, internal procedure, inspection certificate FMP51
KG 3.1 Material certificate+PMI test (XRF), internal procedure, wetted metallic
parts, EN10204-3.1 inspection certificate
FMP51
KP Liquid penetrant test AD2000-HP5-3(PT), wetted/pressurized metallic
parts, inspection certificate
FMP51
KQ Liquid penetrant test ISO23277-1 (PT), wetted/pressurized metallic parts,
inspection certificate
FMP51
KR Liquid penetrant test ASME VIII-1 (PT), wetted/pressurized metallic parts,
inspection certificate
FMP51
KS Welding documentation, wetted/pressurized seams
consisting of
• Welding drawing
• WPQR (Welding Procedure Qualification Report)
• WPS (Welding Process Specification)
• WQR (Manufacturer Declaration)
FMP51
KV Conformity to ASME B31.3:
The dimensions, materials of construction, pressure / temperature ratings
and identification markings of the device comply with the requirements of
ASME B31.3
FMP51
Product documentation on
paper
Test reports, declarations and material certificates can be ordered as hardcopies via ordering feature
570 "Service", option I7 „Product documentation on paper“. The printouts will be enclosed in the
product delivery.