Endress+Hauser Levelflex FMP55 HART - Thickness Upper Layer

Operating menu Levelflex FMP55 HART
180 Endress+Hauser
Description Displays the measured distance D
I
between the reference point (lower edge of flange or
threaded connection) and the interface.
Additional information
D
I
D
I
A0013202
The unit is defined in the Distance unit parameter (→  111).
Interface linearized
Navigation  Diagnostics → Measured val. → Interf. lineariz
Prerequisite Operating mode (→  111) = Interface or Interface with capacitance
Description Displays the linearized interface height.
Additional information The unit is defined in the Unit after linearization parameter →  135.
Thickness upper layer
Navigation  Diagnostics → Measured val. → Thickn.upp.layer
Prerequisite Operating mode (→  111) = Interface or Interface with capacitance
Description Displays the upper interface thickness (UP).