Endress+Hauser Levelflex FMP55 HART - Page 181

Levelflex FMP55 HART Operating menu
Endress+Hauser 181
Additional information
UP
UP
A0013313
UP Thickness upper layer
The unit is defined by the Unit after linearization parameter →  135.
Output current 1 to 2
Navigation  Diagnostics → Measured val. → Output curr. 1 to 2
Description Displays calculated output current.
Measured current 1
Navigation  Diagnostics → Measured val. → Measur. curr. 1
Prerequisite Only available for current output 1
Description Displays the measured value of the output current.
Terminal voltage 1
Navigation  Diagnostics → Measured val. → Terminal volt. 1
Description Dipslays terminal voltage at the current output.