Endress+Hauser Levelflex FMP55 HART - Configuration of the Current Outputs; Adjustment of the Current Outputs; Factory Setting of the Current Outputs for Interface Measurements

Commissioning via operating menu Levelflex FMP55 HART
74 Endress+Hauser
11.6 Configuration of the current outputs
11.6.1 Factory setting of the current outputs for interface
measurements
Current
output
Allocated
measuring vlaue
4mA value 20mA value
1 Interface linearized 0% or the corresponding linearized
value
100% or the corresponding
linearized value
2
1)
Level linearized 0% or the corresponding linearized
value
100% or the corresponding
linearized value
1) for devices with 2 current outputs
11.6.2 Adjustment of the current outputs
The current outputs can be adjusted in the following submenus:
Basic settings
Setup → Advanced setup → Current output 1 to 2
Advanced settings
Expert → Output 1 to 2 → Current output 1 to 2
See "Description of Device Parameters" GP01000F