A0015122
Length H of the rigid part of the rope probe
Probe H
FMP56, rope 4 mm (0.16 in) 94 mm (3.7 in)
FMP57, rope 4 mm (0.16 in) 120 mm (4.7 in)
FMP57, rope 6 mm (0.24 in) 135 mm (5.3 in)
• Permissible nozzle diameter: ≤ 150 mm (6 in).
For larger diameters the near range measuring capability may be reduced.
For nozzles ≥ DN300: → 47.
• Permissible nozzle height
5)
: ≤ 150 mm (6 in).
For a larger height the near range measuring capability may be reduced.
Larger nozzle heights may be possible in special cases (see section "Rod extension/centering
HMP40 for FMP57").
With thermally insulated vessels the nozzle should also be insulated in order to prevent
condensate formation.
5) Larger nozzle heights on request
To Next Page
Loading...
