Liquicap M FMI51 HART Commissioning
Endress+Hauser 61
• Read
The table editor is opened. The existing table can be read but not edited.
• Manual
The table editor is opened. Table values can be entered or modified.
• Semi-automat.
The table editor is opened. The level value is read in automatically. The related measured
value must be entered by the user.
• Delete
The linearization table is deleted.
The linearization table can only be edited if it is disabled.
The table editor
1
0,0000
0,0000
2
0,0000
0,0000
3
0,0000
0,0000
…
0,0000
0,0000
A B C
A0040751
A Row number
B Level column
C Value column
1. Press to go to the next row.
2. Press to go to the previous row.
3. Press to open marked row for editing.
1
0,0000
0,0000
2
0,0000
0,0000
3
0,0000
0,0000
…
0,0000
0,0000
A B C
A0040752
A Row number
B Level column
C Value column
1. Press or to navigate within the table.
2. Press or to navigate on No. column.
3. Press to "Delete", "Insert" or "Move" the entire row.
You can return to the previous step by pressing Escape → 33.
Subfunction: "Status table"
In this function, you can specify whether the linearization table should be used or not.
Options:
• Enabled
The table is used.
• Disabled
The table is not used. The measured value is output linearly with regard to the level unit.
To Next Page
Loading...