Endress+Hauser Liquicap M FMI51 HART - Submenu: System Parameters

Commissioning Liquicap M FMI51 HART
70 Endress+Hauser
Subfunction: "Min. temp."
The subfunction displays the lowest temperature value measured by the device.
Subfunction: "Temperature unit"
The subfunction determines the temperature unit.
Options:
• °C
• °F
• K
Subfunction: "Min/Max temp."
The subfunction resets the "Min/Max temp."
Function: "Measure capacity"
This function displays measuring capacities that were measured by the electronic insert
during operation.
Subfunction: "Measure capacity"
This subfunction displays the currently measured capacity.
Subfunction: "Max. capacity val."
This subfunction displays the highest capacitance value measured by the device.
Subfunction: "Min. capacity val."
This subfunction displays the lowest capacitance value measured by the device.
Subfunction: "Min/Max capacity"
The subfunction resets the "Min. or Max. capacity".
7.7.3 Submenu: "System parameters"
All functions listed in this section can be viewed only.
Function: "Device information"
This function displays all device information with which the device can be identified.
Subfunction: "Device marking"
This subfunction displays the device name e.g. Liquicap M-FMI51.
Subfunction: "Serial No."
This subfunction displays the serial number of the device that was assigned in the factory.
Subfunction: "EC Serial No."
This subfunction displays the serial number of the electronic insert.
Subfunction: "Device marking"
This subfunction displays the device marking and the order code.
Subfunction: "Dev. rev"
This subfunction displays the version of the electronic-hardware.