Endress+Hauser Liquiline CM442R - Accessories; Measuring Cable; Sensors

Liquiline CM442R/CM444R/CM448R Accessories
Endress+Hauser 139
14 Accessories
The most important accessories available at the time this document went to print are listed
below. Contact your service representative or Sales Center for accessories that are not listed
here.
14.1 Measuring cable
Memosens data cable CYK10
• For digital sensors with Memosens technology
pH, ORP, oxygen (amperometric), chlorine, conductivity (conductive)
• Order as per product structure (→ Online Configurator, www.endress.com/cyk10)
• Technical Information TI00118C/07/EN
Memosens data cable CYK11
• Extension cable for digital sensors with Memosens protocol
• Order as per product structure (→ Online Configurator, www.endress.com/cyk11)
14.2 Sensors
14.2.1 Glass electrodes
Orbisint CPS11D
• pH sensor with Memosens technology
• Dirt-resistant PTFE diaphragm
• Order as per product structure (→ Online Configurator, www.endress.com/cps11d)
• Technical Information TI00028C/07/EN
Memosens CPS31D
• pH sensor with Memosens technology
• Gel-filled reference system with ceramic diaphragm
• Order as per product structure (→ Online Configurator, www.endress.com/cps31d)
• Technical Information TI00030C/07/EN
Ceraliquid CPS41D
• pH sensor with Memosens technology
• Ceramic diaphragm and KCl liquid electrolyte
• Order as per product structure (→ Online Configurator, www.endress.com/cps41d)
• Technical Information TI00079C/07/EN
Ceragel CPS71D
• pH sensor with Memosens technology
• Poison-resistant reference with ion trap
• Order as per product structure (→ Online Configurator, www.endress.com/cps71d)
• Technical Information TI00245C/07/EN