Endress+Hauser Liquiline CM442R - Page 95

Liquiline CM442R/CM444R/CM448R Operation
Endress+Hauser 95
Controlled variable
Source of data Options
•Sensors
• Current inputs
• Fieldbus signals
• Binary inputs
•Mathematical functions
Factory setting
None
Specify the input or output which should be the source of
data for the controlled variable.
Measured value Options
•None
• Depends on theSource of
data
Factory setting
None
Specify the measured value that should be your
controlled variable.
The measured value you can select depends on the
option selected under "Source of data".
Setpoint Not available if a fieldbus has been selected as the
"Source of data"
Setpoint Range of adjustment and
factory setting
Depends on the "Source of
data"
Specify the setpoint for the controlled variable.
Path: Menu/Setup/Additional functions/Controller 1 or Controller 2
Function Options Info