Endress+Hauser Liquiline CM444 - Scope of Delivery; Certificates and Approvals

Liquiline CM442/CM444/CM448 Incoming acceptance and product identification
Endress+Hauser 13
4.2.2 Identifying the product
The order code and serial number of your device can be found in the following locations:
• On the nameplate
• In the delivery papers
To find out the version of your device, enter the order code indicated on the nameplate in
the search screen at the following address:
www.products.endress.com/order-ident
4.3 Scope of delivery
• 1 controller in the version ordered
• 1 mounting plate
• 1 wiring label (attached at the factory to the inside of the display cover)
• 1 CD with Operating Instructions
• 1 printed copy of the Brief Operating Instructions in the language ordered
If you have any questions, contact your supplier or your local sales center.
4.4 Certificates and approvals
4.4.1 CE mark: Declaration of Conformity
With this declaration, the manufacturer guarantees that the product conforms to the
regulations of European Directive 2004/108/EC concerning electromagnetic compatibility and
Low Voltage Directive 2006/95/EC. This is proven by observing the standards listed in the
Declaration of Conformity.
4.4.2 cCSAus
The product meets the requirements of "CLASS 2252 05 - Process Control Equipment" and
"CLASS 2252 85 - Process Control Equipment - Certified to US Standards".
4.4.3 FM/CSA (CM442 only)
FM/CSA Cl. I, Div. 2
The device has been developed and tested according to the following standards:
• FM3600 (1998)
• FM3611 (2004)
• FM3810 (2005)
• ANSI/ISA NEMA250 (1999)
• ANSI/IEC 60529 (2001)
4.4.4 MCERTS
Application has been submitted for CM442