Endress+Hauser Liquiline CM444 - Mounting the Measuring Device; Post Mounting

Installation Liquiline CM442/CM444/CM448
16 Endress+Hauser
5.2 Mounting the measuring device
You will require the post mounting kit to mount the unit on a pipe, post or railing (circular or
square, clamping range 20 to 61 mm (0.79 to 2.40")). The post mounting kit can be ordered as
an option.
5.2.1 Post mounting
a0012665
Fig. 9: Post mounting
1
2
3
4
Weather protection cover (optional)
Post mounting plate (post mounting kit)
Spring washers and nuts (post mounting kit)
Pipe clamps (post mounting kit)
5
6
7
8
Spring washers and nuts (post mounting kit)
Pipe or post (circular/square)
Mounting plate
Threaded rods (post mounting kit)
a0012666
Fig. 10: Post mounting
a0012667
Fig. 11: Attach the device and click it into place