Endress+Hauser Liquiline CM444 - Installation; Post-Installation Check

Liquiline CM442/CM444/CM448 Installation
Endress+Hauser 19
5.2.4 Disassembly (for conversion, cleaning etc.)
NOTICE
The device can be damaged if dropped
‣ When pushing the housing out of the holder, secure the housing in such a way that you do
not drop it. If possible, ask a second person to help you.
5.3 Post-installation check
‣ After installation, check the transmitter for damage.
‣ Check whether the transmitter is protected against moisture and direct sunlight (e.g. by the
weather protection cover).
a0013154
Fig. 18: Disassembly
1. Hold down the latch
2. Push up the housing to remove it from the holder
a0013155
Fig. 19: Disassembly
3. Remove the device from the front