Liquiline CM442/CM444/CM448 Operation
Endress+Hauser 57
If two or more diagnostics messages occur simultaneously, only the icon for the message
with the highest priority is shown on the display (for the order of priority according to
NAMUR, see the "Changing diagnostic information" section).
10.1.4 Assignment views
Assignment views, e.g. Channel assignment view, appear as the last function in many sections
of the menu.
You can use this function to see which actuators or functions are connected to an or a sensor
channel.
The assignments appear in hierarchical order.
Title bar Simulation mode active or Memocheck SIM connected
At measured value The measured value is influenced by a simulated value
At measured value The displayed measured value is simulated
1) Only pH or ORP measurement
Icon Location Description
To Next Page
Loading...
