Liquiline CM44P Technical data
Endress+Hauser 193
PROFINET
Protocol "Application layer protocol for decentral device periphery and
distributed automation", PNIO Version 2.34
Communication type 100 MBit/s
Conformance Class Conformance Class B
Netload Class Netload Class II
Baud rate Automatic 100 Mbps with full-duplex detection
Cycle times From 32 ms
Device profile Application interface identifier 0xF600
Generic device
PROFINET interface 1 port, Realtime Class 1 (RT_CLASS_1)
Manufacturer ID 0x11
h
Device type ID 0x859C D
h
Device description files (GSD) Information and files under:
• www.endress.com
On the product page for the device: Documents/Software →
Device drivers
• www.profibus.com
On the website under Products/Product Finder
Polarity Auto-polarity for automatic correction of crossed TxD and RxD
pairs
Supported connections • 1 x AR (IO Controller AR)
• 1 x AR (IO-Supervisor Device AR connection allowed)
• 1 x Input CR (Communication Relation)
• 1 x Output CR (Communication Relation)
• 1 x Alarm CR (Communication Relation)
Configuration options for measuring device • Web browser
• Manufacturer-specific software (FieldCare, DeviceCare)
• Device master file (GSD), can be read out via the integrated
web server of the measuring device
Configuration of the device name DCP protocol
Supported functions • Identification & Maintenance
Simple device identification via:
• Process control system
• Nameplate
• Measured value status
The process variables are communicated with a measured
value status
• Blinking feature (FLASH_ONCE) via the local display for
simple device identification and assignment
• Device operation via operating tools (e.g. FieldCare,
DeviceCare)
System integration For information on system integration, see the Operating
Instructions
• Cyclic data transmission
• Overview and description of the modules
• Status coding
• Startup configuration
• Factory setting
To Next Page
Loading...
