Electrical connection Liquiline CM44P
38 Endress+Hauser
1. Sensor cable connected directly
Connect the sensor cable to the terminal connector of the sensor module PEM 2DS or
of the module Base2-E.
2. When connecting via M12 connector (Memosens sensors only)
Connect the sensor connector to an M12 sensor socket which has been previously
installed or is supplied on delivery.
Sensor cable connected directly
98 97 88 87
86 85 86 85
BN
WH
GN
YE
Sensor
A0039629
43 Memosens sensors without additional supply
voltage
98 97 88 87
86 85 86 85
GN
YE
Sensor
PK
GY
A0039622
44 Memosens sensors with additional supply
voltage
85 86
85
2DS
1
2
86
97 88 8798
97 88 8798
Sensor 1
Sensor 2
PK
GY
GN
YE
BN
WH
GN
YE
Sensor
Sensor
A0033206
45 Memosens sensors with and without
additional supply voltage at sensor module 2DS
A0028599
46 PEM module
To Next Page
Loading...
