3
General features
Modular design
Quick setup To the first measuring value within 1 minute
After setting up the few parameters in the Quick Setup menu, the measuring point is ready to measure. The
first measured value is reliably displayed.
Navigator and plain text The unique operating concept sets new standards:
• Fewer user errors thanks to very easy operation
• Quick configuration with the Navigator.
• Intuitive configuration and diagnosis due to plain text display
Sensor monitor Pressing the DIAG key takes you to the sensor monitor. All the important sensor data, incl. warning and alarm
limits, are graphically displayed in one go.
Process check system (PCS) This function checks the measuring signal for stagnation. If the measuring signal does not change for some time
(several measured values), an alarm is triggered. Soiling, blockage or similar could be the cause of such
behaviour.
a0001296
Inside Liquiline (version with sensor module, without wiring)
a0004956
CPU and sensor module
a0001984
Navigator
a0001985-en
Plain text display
a0001771-en
Sensor monitor (example)
To Next Page
Loading...
