Endress+Hauser Liquiphant FTL51B - Incoming Acceptance and Product Identification; Incoming Acceptance Checks; Product Identification Methods; Nameplate Details

Liquiphant FTL51B Mounting
Endress+Hauser 9
1
A0037879
 3 Installation examples for a vessel, tank or pipe
1 Temperature spacer/pressure-tight feedthrough (optional) for tank with insulation and/or high
process temperatures
4.1 Mounting conditions
4.1.1 Take switch point into consideration
Typical switch points, depending on the orientation of the point level switch
(water +23 °C (+73 °F))
~13 (0.5)
~4 (0.16)
~12.5 (0.49)
D
A B C
D
D
A0037915
 4 Typical switch points. Unit of measurement mm (in)
A Installation from above
B Installation from below
C Installation from the side
D Switch point