Endress+Hauser Liquiphant FTL64 - Commissioning Procedures and Tools; Device As-Delivered State and Function Checks; Establishing FieldCare and DeviceCare Connections

Liquiphant FTL64
32 Endress+Hauser
Tuning fork
40 (1.57)
17.2 (0.68)
17 (0.67)
1.5 (0.06)
10 (0.39)
A0038269
 38 Tuning fork. Unit of measurement mm (in)
Process connections
Thread ISO228 G
50.5 (1.99)
32
66.5 (2.62)
A0035549
 39 Thread ISO228 G ¾. Unit of
measurement mm (in)
≤ 100 bar (1 450 psi), ≤ 280 °C (536 °F)
41
69 (2.72)
50.5 (1.99)
A0037756
 40 Thread ISO228 G 1. Unit of
measurement mm (in)
≤ 100 bar (1 450 psi), ≤ 280 °C (536 °F)
Thread ASME B1.20.3, MNPT
32
50.5 (1.99)
71.5 (2.81)
A0038274
 41 Thread ASME B1.20.3, MNPT ¾. Unit of
measurement mm (in)
≤ 100 bar (1 450 psi), ≤ 280 °C (536 °F)
50.5 (1.99)
75.5 (2.97)
41
A0042433
 42 Thread ASME B1.20.3, MNPT 1. Unit of
measurement mm (in)
≤ 100 bar (1 450 psi), ≤ 280 °C (536 °F)
Thread EN10226, R
32
50.5 (1.99)
66.5 (2.62)
A0042432
 43 Thread EN10226, R ¾. Unit of
measurement mm (in)
≤ 100 bar (1 450 psi), ≤ 280 °C (536 °F)
50.5 (1.99)
69 (2.72)
41
A0042434
 44 Thread EN10226, R 1. Unit of
measurement mm (in)
≤ 100 bar (1 450 psi), ≤ 280 °C (536 °F)