Endress+Hauser Liquiphant M FTL50H - Process Connections: Threads, Flanges, and Necks; Threaded and Flanged Process Connections; Welding Necks and Flush-Mounting Options

Liquiphant M FTL50(H), FTL51(H)
28 Endress+Hauser
Process connections for FTL50(H) and FTL51(H)
Process connection Dimensions Accessories Pressure
Temperature
G ¾
DIN ISO 228/l
with defined
thread start
With elastomer
flat seal to DIN 7603:
supplied
GQ2
GQ5
L00-FTL5xxxx-06-05-xx-en-001
max. 100 bar
max. 150 °C
G ¾
DIN ISO 228/l
with defined
thread start
For flush-mounted
installation in
welding neck
GQ2
GQ5
L00-FTL5xxxx-06-05-xx-en-001
Welding neck
(with defined
thread start)
with silicone O-ring
Endress+Hauser
52001052
In conformity with
FDA*
See "Accessories"
max. 25 bar
max. 150 °C
max. 40 bar
max. 100 °C
G 1
DIN ISO 228/l
With elastomer
flat seal to DIN 7603:
supplied
GR2
GR5
L00-FTL5xxxx-06-05-xx-en-002
max. 100 bar
max. 150 °C
G 1
DIN ISO 228/l
with defined
thread start
With seal surface
for flush-mounted
installation in
welding neck
GW2
L00-FTL5xxxx-06-05-xx-en-003
Welding neck
(with defined
thread start)
with silicone O-ring
Endress+Hauser
52001051
In conformity with
FDA*
See "Accessories"
max. 25 bar
max. 150 °C
max. 40 bar
max. 100 °C
NPT ¾
ANSI B 1.20.1
or
R ¾
EN10226
GM2
GM5
GE2
GE5
L00-FTL5xxxx-06-05-xx-en-004
In conformity with
FDA*
max. 100 bar
max. 150 °C
NPT 1
ANSI B 1.20.1
or
R 1
EN10226
GN2
GN5
GF2
GF5
L00-FTL5xxxx-06-05-xx-en-005
In conformity with
FDA*
max. 100 bar
max. 150 °C
Flanges
ANSI B 16.5
EN 1092-1
(DIN 2527 B)
JIS B2220
A##
B##
C##
F##
N##
K##
L00-FTL5xxxx-06-05-xx-xx-008
Seal
according to design
installed on site
In conformity with
FDA*
See nominal pressure
of flange, however
max. 100 bar
max. 150 °C
* FDA approved materials according to 21 CFR Part 177.1550/2600
50.5
66.5
32 AF
50.5
66.5
32 AF
69
50.5
41 AF
80
61.3
41 AF
(66.5)
50.5
32 AF
(69)
50.5
41 AF
66.5