EasyManua.ls Logo

Endress+Hauser Liquiphant M FTL50H - Product Configuration: Connections, Probes, Electronics; Additional Process Connections and Probe Types; Electronics, Housings, and Cable Entries

Endress+Hauser Liquiphant M FTL50H
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Liquiphant M FTL50(H), FTL51(H)
Endress+Hauser 39
KA2 10 K 25 RF 316L Flange JIS B2220
KC2 10 K 40 RF 316L Flange JIS B2220
KE2 10 K 50 RF 316L Flange JIS B2220 1.7 kg
KE5 10 K 50 RF AlloyC4 >316L Flange JIS B2220 1.7 kg
KL2 10 K 80 RF 316L Flange JIS B2220
KP2 10 K 100 RF 316L Flange JIS B2220
TC2 DN25-38 (1...1½") 316L ISO 2852 Tri-Clamp
TE2 DN40-51 (2") 316L ISO 2852 Tri-Clamp 0.1 kg
YY9 Special version
30 Probe Length; Type:
FTL50
AA Compact; Ra <3.2 μm/80 grit
IA Compact; temperature spacer 0.6 kg
QA Compact; pressure tight feed through 0.7 kg
FTL51
BB ....... mm; 316L** Ra <3.2 μm/80 grit
BE ....... mm; AlloyC4** Ra <3.2 μm/80 grit
CB ....... inch; 316L** Ra <3.2 μm/80 grit
CE ....... inch; AlloyC4** Ra <3.2 μm/80 grit 2.3 kg/100 in
DB Length: type II*; 316L Ra <3.2 μm/80 grit 0.1 kg
DE Length: type II*; AlloyC4 Ra <3.2 μm/80 grit 0.1 kg
JB ....... mm; 316L** + temperature spacer 0.9 kg/m
+0.6 kg
JE ....... mm; AlloyC4** + temperature spacer 0.9 kg/m
+0.6 kg
KB ....... inch; 316L** + temperature spacer 2.3 kg/100 in
+0.6 kg
KE ....... inch; AlloyC4** + temperature spacer 2.3 kg/100 in
+0.6 kg
LB Length: type II*; 316L + temperature spacer 0.1 kg
+0.6 kg
LE Length: type II*; AlloyC4 + temperature spacer 0.1 kg
+0.6 kg
RB ....... mm; 316L** + pressure tight feed through 0.9 kg/m
+0.7 kg
RE ....... mm; AlloyC4** + pressure tight feed through 0.9 kg/m
+0.7 kg
SB ....... inch; 316L** + pressure tight feed through 2.3 kg/100 in
+0.7 kg
SE ....... inch; AlloyC4** + pressure tight feed through 2.3 kg/100 in
+0.7 kg
TB Length: type II*; 316L + pressure tight feed through 0.1 kg
+0.7 kg
TE Length: type II*; AlloyC4 + pressure tight feed through 0.1 kg
+0.7 kg
YY Special version
*) Replacing instruments: when vertically mounting a Liquiphant M
FTL51 with length II, the switch point is at the same height as for the
Liquiphant II FTL360, FTL365, FDL30, FDL35
**) Order 3001...6000 mm (116...235 in) via yy
40 Electronics; Output:
A FEL50A PROFIBUS PA
1 FEL51* 2-wire, 19...253 V AC
2 FEL52* 3-wire PNP, 10... 55 V DC
4 FEL54 relay DPDT, 19...253 V AC, 19...55 V DC
5 FEL55 8/16 mA, 11... 36 V DC
6 FEL56 NAMUR (L-H signal)
7 FEL57 2-wire PFM
8 FEL58* NAMUR + test button (H-L signal)
9 Special version
*) Also available in compact housing
50 Housing; Cable Entry:
C3 Compact 316L IP66/68; cable 5 m
D3 Compact 316L IP65; plug Pg11 ISO 4400
20 Process Connection: Additional weight

Table of Contents

Other manuals for Endress+Hauser Liquiphant M FTL50H

Related product manuals