Endress+Hauser Liquiphant M FTL50H - Lap Joint Flange; Lap Joint Flanges; Sliding Sleeves for Unpressurised Operation

Liquiphant M FTL50(H), FTL51(H)
46 Endress+Hauser
Lap joint flange
Lap joint flanges
Sliding sleeves
for unpressurised operation
Order number: 918158-0000
with G 1 thread for mounting
a Liquiphant FTL50, FTL51
with process connection GR2
Pressure up to 40 bar
Material: corrosion-resistant steel
1.4301 (AISI 304)
Weight: 0.54 kg
L00-FTL5xxxx-06-05-xx-xx-024
14
G1 12
2
92
92
with G 1 thread for mounting
a Liquiphant FTL50, FTL51
with process connection GR2
Material: corrosion-resistant steel
1.4571 (AISI 316Ti)
– Order number: 918143-0000
Flange DN50 PN40, EN 1092-1
Weight: 3.11 kg
– Order number: 918144-0000
Flange ANSI 2", 150 psi, RF
Weight: 2.38 kg
L00-FTL5xxxx-03-05-xx-xx-015
for continuous adjustment of the switch point
of a Liquiphant M FTL51
Material: corrosion-resistant steel
1.4435 (AISI 316L)
Weight for G 1, NPT 1: 0.21 kg
Weight for G 1½, NPT 1½: 0.54 kg
L00-FTL5xxxx-06-05-xx-en-006
Thread Standard Material Order number Approval
G 1 DIN ISO 228/I 1.4435 (AISI 316L) 52003978
G 1 DIN ISO 228/I 1.4435 (AISI 316L) 52011888 3.1 material certificate
NPT 1 ANSI B 1.20.1 1.4435 (AISI 316L) 52003979
NPT 1 ANSI B 1.20.1 1.4435 (AISI 316L) 52011889 3.1 material certificate
G 1½ DIN ISO 228/I 1.4435 (AISI 316L) 52003980
G 1½ DIN ISO 228/I 1.4435 (AISI 316L) 52011890 3.1 material certificate
NPT 1½ ANSI B 1.20.1 1.4435 (AISI 316L) 52003981
NPT 1½ ANSI B 1.20.1 1.4435 (AISI 316L) 52011891 3.1 material certificate
22
19
M6 (3x)
18
G1A
(1 NPT)
G1½A
(1½ NPT)
19
M6 (3x)
p=
0 bar
e
FTL51
41 AF
55 AF