Endress+Hauser Liquistation CSF33 - Page 126

Operation Liquistation CSF33
126 Endress+Hauser
Menu/Setup/Additional functions/Measuring range switch
Function Options Info
Current output
Range lower unit Depends on the Operating
mode
Units are only queried for Operating mode =
Conductivity . The other units are pre-defined
and cannot be modified.
• Conductivity
S/m, mS/cm, µS/cm, S/cm, µS/m, mS/m
• Concentration
%
• TDS
ppm
• Resistance
Ωcm
Range lower value
Range upper unit
Range upper value
Limit switches
Range lower unit Depends on the Operating
mode
Units are only queried for Operating mode =
Conductivity . The other units are pre-defined
and cannot be modified.
• Conductivity
S/m, mS/cm, µS/cm, S/cm, µS/m, mS/m
• Concentration
%
• TDS
ppm
• Resistance
Ωcm
Range lower value
Range upper unit
Range upper value