Inputs: Oxygen Liquistation CSF48
134
12 Inputs: Oxygen
12.1 Basic settings
12.1.1 Sensor identification
12.1.2 Main value
12.1.3 Damping
--> "Inputs: General/Frequently occurring functions" section ä 108
Path: Menu/Setup/Inputs/<Sensor type>
Function Options Info
Channel Options
•On
•Off
Factory setting
On
On
The channel display is switched on in the measuring
mode
Off
The channel is not displayed in the measuring mode,
regardless of whether a sensor is connected or not.
Sensor type Read only
(Only available if a sensor is
connected)
Connected sensor type
Order code Order code of the connected sensor
Path: Menu/Setup/Inputs/DO
Function Options Info
Main value Options
• Concentration liquid
• Concentration gaseous
• Saturation
• Partial pressure
• Raw value nA (only
Oxygen (amp.))
• Raw value s (only
Oxygen (opt.))
Factory setting
Concentration liquid
Decide how you want to display the main value. Other
functions, such as the setting for the unit, depend on
this setting.
To Next Page
Loading...
