Liquistation CSF48 Programming
37
4.2 Program type: Basic
With the Basic program type, you can create simple sampling programs quickly based on time,
volume and flow. In the case of volume- and flow-controlled sampling, the inputs have to be
configured appropriately beforehand. If you want to create a program and use it immediately,
you have to check the configuration of the sampler before programming. You can make the set-
tings under "Menu/Setup/General settings/Sampling": e.g. the bottle configuration, and the bot-
tle volume, as well as the correct dosing volume for the device version with a vacuum pump. The
dosing volume setting makes it possible to correctly calculate the level in the bottle and is a reli-
able way of preventing the bottles from being overfilled.
You can go to the Setup program either via the overview under "Select sampling program"
or via the path "Menu/Setup/Sampling programs".
Path: Menu/Setup/Sampling programs
Function Options Info
Current program: Read only The last sampling program to be created or used is
displayed.
Status Read only Display "Active":
The sampling program has been started and the
device takes a sample as per the set parameters.
Display "Inactive":
No sampling program has been started, or a pro-
gram that was running has been paused.
Display "Pause":
Sampling program paused.
Setup program
New A list of all the programs created is displayed. For
this reason, it is often helpful to add a "B" for Basic in
the program name.
Program1, which is supplied with the device, is displayed, as is a list of all the programs already created (Basic,
Standard or Advanced programs). You can either create a new program or select an existing one.
If you select an existing program, you can edit, delete, start or duplicate it. Furthermore, you can also see whether
this program is a Basic, Standard or Advanced program.
If you are creating a new program, select the Basic, Standard or Advanced program type.
Basic
Program name Customized text Use a distinct name for your sampling program. The
program name can be up to 16 characters long.
Bottle configuration Choice of all possible bottle com-
binations
The ordered bottle configuration is preset or the
configuration selected in the setup is displayed.
To Next Page
Loading...
