Electrical connection Liquistation CSF48
42 Endress+Hauser
Binary inputs
When connecting to an internal voltage source, use the terminal connection on the rear of the
dosing chamber. The connection is located on the lower terminal strip (on the far left, + and -),
see the "Power supply terminal assignment" section.
Binary outputs
a0013381
Fig. 46: Assignment of binary inputs 1 and 2
1 Binary input 1 (191/192)
2 Binary input 2 (291/292)
a0013404
Fig. 47: Binary input with external voltage source
a0013382
Fig. 48: Assignment of binary outputs 1 and 2
1 Binary output 1 (145/146)
2 Binary output 2 (245/246)
To Next Page
Loading...
