Liquistation CSF48 Electrical connection
Endress+Hauser 43
When connecting to an internal voltage source, use the terminal connection on the rear of the
dosing chamber. The connection is located on the lower terminal strip (on the far left, + and -),
see the "Power supply terminal assignment" section.
Binary outputs with relay option
a0013407
Fig. 49: Binary output with external voltage source
a0016343
Fig. 50: Relay
1Binary output 1
2Binary output 2
The left relay is activated with binary output 1, while the right relay is activated by binary output
2.
To Next Page
Loading...
