Endress+Hauser Liquistation CSF48 - Page 79

Liquistation CSF48 Operation
Endress+Hauser 79
Overflow warnings
Logbook program="Fill up
buffer"
Options
•Off
•On
Factory setting
Off
If the fill-up buffer overruns, you can decide whether
you want to receive a diagnostic message from the
controller or not for each individual logbook.
Measuring parameter Read only Plain-text information on the parameter that is being
recorded
Main value Read only Information on the main value and the unit.
Unit Read only
Data logbooks
New You can create a maximum of 8 data logbooks.
Logbook name Customized text,
20 characters
Source of data Options
•None
• Binary input 1
• Binary input 2
• Analog input 1
• Analog input 2
•Temperature
Factory setting
None
Select the input that should be the data source of the
logbook entries.
Measured value Options
• Depends on Source of
data
Factory setting
None
You can record different measured values depending on
the source of data.
Scan time 00:00:01 to 01:00:00
Factory setting
00:01:00
Minimum interval between two entries
Format: HH:MM:SS
Path: Menu/Setup/General settings/Logbooks
Function Options Info