Endress+Hauser Liquisys M CUM253 - Page 90

Repair Liquisys M CUM223/253
90 Endress+Hauser
Item Kit description Name Function/contents Order number
10 Power unit (main module) LSGA 100 / 115 / 230 V AC 51500317
20 Power unit (main module) LSGD 24 V AC + DC 51500318
40 Central module (controller) LSCH-S1 1 current output 51501228
50 Central module (controller) LSCH-S2 2 current outputs 51501229
60 Central module (controller) LSCH-H1 1 current output + HART 51501230
70 Central module (controller) LSCH-H2 2 current outputs + HART 51501231
80 Central module (controller) LSCP PROFIBUS PA/no current output 51501232
90 Central module (controller) LSCP-DP PROFIBUS DP/no current output 51502499
90 Kit CUM2x3 Central module
PROFIBUS DP
LSCP-DP Central module PROFIBUS DP
Relay module + 2 relays
Current input and terminals
valid of: hardware version 2.10
71134728
270 Turbidity transmitter MKT1 Turbidity + temperature 51501209
290 Relay module LSR1-2 2 relays 51500320
290 Relay module LSR2-2i 2 relays + current input 4 to 20 mA 51504304
290 Kit CxM2x3 Relay module
PROFIBUS DP
LSR2-DP Relay module + 2 relays
Current input and terminals DP
valid of: hardware version 2.10
71134732
300 Relay module LSR1-4 4 relays 51500321
300 Relay module LSR2-4i 4 relays + current input 4 to 20 mA 51504305
310, 320 Ribbon cable lines 2 ribbon cable lines 51501074
330, 340,
450
Internal housing parts Docking assembly, empty electronics
box, small parts
51501073
450a,
450c
Torx screws K4x10 Internal housing parts
450b Torx screw for central module Internal housing parts
370, 410,
420, 430,
460
Housing cover Display cover, connection
compartment cover, front membrane,
hinges, cover screws, small parts
51501068
460a,
460b
Screws for housing cover Parts of housing cover
400, 480 Housing base Base, threaded joints 51501072
430 Hinges 2 pairs of hinges 51501069
470 Terminal strip Terminal strip for connection to
mains
51501079
A Electronics box with relay
module LSR1-x (bottom) and
power unit LSGA/LSGD (top)
B Fuse also accessible if
electronics box installed
C Fuse Part of power unit, item 10
D Choice of line voltage Position of jumper on power unit,
item 10 depending on desired line
voltage