Endress+Hauser Micropilot FMR60 - Hard-Copy Product Documentation; Test, Certificate

DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFTDRAFT DRAFT DRAFT
Micropilot FMR60
Endress+Hauser V. 4, Rev. 2, 19-03-2018 53
Test, certificate
Feature 580 "Test, certificate" Description
JA 3.1 Material certificate, wetted metal parts, EN10204-3.1 inspection
certificate
Test reports, declarations and inspection certificates are available in electronic format in the
W@M Device Viewer:
Enter the serial number from nameplate (www.endress.com/deviceviewer)
This concerns the options for the following order codes:
• 550 "Calibration"
• 580 "Test, certificate"
Hard-copy product
documentation
Hard-copy versions of the test reports, declarations and inspection certificates can also be order via
order code 570 "Service", option I7 "Hard-copy product documentation". The documents are then
supplied with the product.