Endress+Hauser Micropilot FMR67B - Device Configuration and Language

Micropilot FMR67B PROFINET with Ethernet-APL
48 Endress+Hauser
UNI flange UNI 4"/DN100/100A for antennas with alignment unit
90°
!185 (7.28)
!225 (8.86)
4×90
°
45°
4×90° (=360°)
90°
!23 (0.91)
!19 (0.75)
!175 (6.89)
(=360°)
10 (0.39)
!95.2 (3.75)
22 (0.87)
A0048838
 56 Dimensions of UNI flange UNI 4"/DN100/100A for antennas with alignment unit. Unit of
measurement mm (in)
UNI flange UNI 4"/DN100/100A
Suitable for ASME B16.5, 4" 150lbs / EN1092-1; DN100 PN16 / JIS B2220; 10K 100A
• Material:
Aluminum
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
1.4 kg (3.09 lb)
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.