Micropilot FMR67B PROFINET with Ethernet-APL
Endress+Hauser 51
UNI flange 10"/DN250/250A for antennas with alignment unit
12×30°
30°
(=360°)
!358 (14.1)
!405 (15.9)
!26 (1.02)
22 (0.87)
10 (0.39)
!95.2 (3.75)
A0048841
59 Dimensions of UNI flange 10"/DN250/250A for antennas with alignment unit. Unit of
measurement mm (in)
UNI flange 10"/DN250/250A
Suitable for ASME B16.5, 10" 150lbs / EN1092-1; DN250 PN16 / JIS B2220; 10K 250A
• Material:
Aluminum
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
4.7 kg (10.36 lb)
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.
Weight
The weights of the individual components must be added together for the total weight.
Housing
Weight including electronics and display.
Single compartment housing
• Plastic: 0.5 kg (1.10 lb)
• Aluminum: 1.2 kg (2.65 lb)
• 316L hygiene: 1.2 kg (2.65 lb)
Dual compartment housing
Aluminum: 1.4 kg (3.09 lb)
Dual compartment housing, L-form
• Aluminum: 1.7 kg (3.75 lb)
• Stainless steel: 4.5 kg (9.9 lb)
To Next Page
Loading...
