Commissioning Micropilot FMR67B PROFINET with Ethernet-APL
48 Endress+Hauser
9.4 Configuring the operating language
9.4.1 Local display
Setting the operating language
To set the operating language, the display first needs to be unlocked:
1. Press the key for at least 2 s.
A dialog box appears.
2. Unlock the display operation.
3. Select the Language parameter in the main menu.
4. Press the key.
5. Select the desired language with the or key.
6. Press the key.
Display operation locks automatically (except in the Safety mode wizard):
• after 1 min on the main page if no key has been pressed
• after 10 min within the operating menu if no key has been pressed
9.4.2 Operating tool
Set display language
System → Display → Language
Selection in Language parameter; Visibility depends on order options or device settings
9.4.3 Web server
A0048882
1 Language setting
To Next Page
Loading...
