Endress+Hauser Micropilot FMR67B - Adjustable Flange Seals

Accessories Micropilot FMR67B PROFINET with Ethernet-APL
66 Endress+Hauser
Material
Plastic
Order number for accessories:
71438291
14.3 Adjustable flange seal
The adjustable flange seal is used to align the sensor to the surface of the product. It can
be ordered directly with the device via the product structure "Accessory enclosed" or
individually via the specific order number.
14.3.1 Seal, adjustable, DN80
The seal, adjustable, DN80 is compatible with flanges EN DN80 PN10/PN40
4°
ø142 (5.59)
ø89 (3.5)
±8°
14 (0.55)
22 (0.87)
30 (1.18)
A0046695
Technical data
• Material: EPDM
• Recommended screw size: M14
• Recommended screw length: 100 mm (3.9 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)
Ordering information
• The flange seal can be ordered together with the device via the "Accessory enclosed"
product structure.
• Order number: 71074263
14.3.2 Seal, adjustable, DN100
The seal, adjustable, DN100 is compatible with flanges EN DN100 PN10/PN16
4°
ø162 (6.38)
ø115 (4.53)
±8°
14 (0.55)
23.5 (0.93)
33 (1.3)
A0046696