Endress+Hauser Micropilot FMR67B - Seal, Adjustable, DN150; Seal, Adjustable, ASME 3; JIS 80 A

Micropilot FMR67B PROFINET with Ethernet-APL Accessories
Endress+Hauser 67
Technical data
• Material: EPDM
• Recommended screw size: M14
• Recommended screw length: 100 mm (3.9 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)
Ordering information
• The flange seal can be ordered together with the device via the "Accessory enclosed"
product structure.
• Order number: 71074264
14.3.3 Seal, adjustable, DN150
The seal, adjustable, DN150 is compatible with flanges EN DN150 PN10/PN19
4°
ø218 (8.58)
ø169 (6.65)
±8°
14 (0.55)
26.5 (1.04)
39 (1.45)
A0046697
Technical data
• Material: EPDM
• Recommended screw size: M18
• Recommended screw length: 110 mm (4.3 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)
Ordering information
• The flange seal can be ordered together with the device via the "Accessory enclosed"
product structure.
• Order number: 71074265
14.3.4 Seal, adjustable, ASME 3"/ JIS 80A
The seal, adjustable, ASME 3"/ JIS 80A is compatible with flanges ASME 3" 150 lbs and
JIS 80A 10K
4°
ø133 (5.2)
ø89 (3.5)
±8°
14 (0.55)
22 (0.87)
30 (1.18)
A0046698